Trend Router Bits: The most popular styles explained

Trend Router Bits | Cutting Wood

It’s probably one of the most versatile tools in your workshop – your Router.

Yet, this powerful tool is nothing more than just a spinning motor without the addition of router cutter bits. Add a router jig into the mix and a vast array of shapes, joints and holes can be at your disposal.

There is an enormous number of different router bits available, in varying styles and sizes to suit almost any task - and it can be a challenge to recall each one.

As a Trend Silver Stockist, here at Toolfix we’re well equipped to offer a professional range of router bits, routing jigs and woodworking accessories. Trend are the UK´s leading brand with over 50 years of experience in the industry, pushing the boundaries of routing technology to offer total solutions. Trend router bits are precision engineered to the highest standards and tolerances and are widely used for the most demanding applications in the professional manufacturing and woodworking trades.

We stock a vast range of cutters, whilst the entire range we can offer is even vaster. The following guide should help to explain the differences between the key ranges that are available to help you to make an informed choice.

You can discover more about what we can supply from our Trend Stockist Page or you can check out the latest Trend Catalogue here.

Alternatively, choose from over 8000 Trend products available to buy online today.

Trend Router Bits

The most commonly supplied variation of router cutters are Tungsten Carbide Tipped (TCT for short). Most cutters have tungsten carbide tips brazed onto a steel body for maximum working performance and cost-effectiveness. Tungsten carbide is a combination of equal parts tungsten and carbon to form an extremely hard material that is very abrasion resistant and can withstand higher temperatures than High Speed Steel (HSS).

The professional range of Trend router bits are specially developed using micro-granular D-NAMIC Tungsten Carbide Tips from the world’s leading carbide manufacturer, which are designed to withstand the most abrasive materials. The highly ground tip face ensures perfect sharpness & gives a cleaner cut on softwoods, hardwoods, MDF, plywood & chipboard. Advanced automated grinding improves the carbides resistance to wear and gives longer life when cutting abrasive materials.

Trend Straight Two Fluted Router BitsStraight cutters are generally used for trimming and cutting straight edges, and cutting straight rebates, slots and grooves. For these operations the router is guided by the side fence or against a batten edge. Using a template or guide bush, they can also be used for similar operations on regular or irregular curved work. They are also valuable for producing a range of joints.
Both 6.3mm and 12.7mm diameter straight cutters are suitable for grooving and rebating. A 1/4 inch (6.35mm) cutter can be plunged in centrally away from the board edge. A 1/2 inch (12.7mm) cutter must enter from the edge of the board.

Always resist the temptation to rout grooves and joints in one pass of the router, so take several shallow cuts. This will ensure a better finish is obtained and it will reduce the load on the router. Mounting a waste piece at the end of the components clamped ready for machining will ensure the end panel does not split out (the cut is carried through into the waste piece).

Trend Router Bits | TrimmingBearing guided trimming cutters allow veneers and laminates to be trimmed flush with the edge of the base material, leaving a perfect chip free square edge. They can also be used to trim a thin workpiece flush to the edge contour of a pre-cut template.

When using plastic laminate always allow laminate adhesive to dry before trimming to avoid clogging the guide bearing.

To retain cutter life always restrict overlap of material to a maximum of 3mm.

Trend Router Bits | RebateSelf guided rebate cutters can be used on straight as well as curved work. Although the width of the rebate is set by the guide bearing diameter, different diameter bearings can be fitted to vary the rebate size.

Trend Router Bits | ChamferChamfers can be run the full length of the workpiece or ´stopped´ a short distance from the end. For the latter, a stop can be fitted to limit the router travel.

Chamfers can be used as a decorative edge on timber worktops, furniture legs and rails. They can also be used for removing the arris on posts and rail structures, such as fences, gates and garden furniture. When joining boards edge to edge, abutting edges can be chamfered to produce a vee-groove to disguise the glue joint.

Trend Router Bits | V-GrooveThe main uses of the v-cutter are for decorative grooves, fluting, imitation matchlining on panel materials, and free-hand or template letter carving. Light edge chamfering can also be carried out using this cutter on both timber and laminates.

Trend Router Bits | Ovolo & Rounding OverThese are generally used to soften the appearance of square edged worktops, window boards and furniture. By lowering the cutter, a top step can be routed. By performing a second pass on the reverse of the workpiece, a full bull-nose can be achieved.

Trend Router Bits | Decorative OgeeThis is one of the most popular of the traditional decorative moulding cutters. The ogee cutter is suitable for finishing the edges of tables and cabinet tops as well as mirror and picture frames.

Trend Router Bits | Radius, Cove and CavettoGenerally used as decorative cutters, cove cutters can be used to rout a decorative edge finish, for fluting, or produce pipe and cable ducts. When producing small section cove beading, it is recommended to cut the moulding on both edges of a wide piece of timber prior to separating them by sawing along the centre. This allows the workpiece to be held safely.

Trend Router Bits | DovetailAlthough used for cutting housings for shelf ends, unlike straight cutters, the dovetail profile must be cut in one pass only. Always cut the housing before the dovetail tongue and adjust the tongue width to suit. For ease and safety, it is worth considering using the router mounted in an inverted router table for cutting the tongues.

If a router below 750 watts is to be used, the load can be reduced by routing a relief cut with a straight cutter first in the centre of the area to receive the dovetail cut. This reduces the amount of material to be removed, reducing load on the router. The batten is adjusted to make a wider dovetail groove. Clamp support sections either side to prevent the router from tipping.