TOGGLER SnapSkru Self-Drilling Plasterboard Fixings

100 x SnapSkru Self Drill Plasterboard Fixings

Don't forget screws!

• Pack Size: 100
• Ultimate Working Load (UWL) in 12.5mm Plasterboard: 36kg
• Safe Working Load (SWL) in 12.5mm Plasterboard*: 9kg
• Use with screw diameter sizes: 3.5 - 5.0mm (4mm recommended)

* Multiple fixings can be used to increase the safe working load of what they will collectively hold. Note: This is dependent on the material they are being fixed to and the spacing of the fixings (eg. 2x fixings used in plasterboard right next to each other will not equal double the load as the same small area of plasterboard will have the entire load excerted on it).

The TOGGLER® SnapSkru self-drilling drywall anchor needs no drill and installs as quickly and easily as an ordinary self-drilling drywall “auger” anchor, but its unique “Snap Lock” feature provides positive behind the-wall locking with the holding power of a toggle bolt - with up to 80% more holding power than conventional anchors on the market!

Use TOGGLER® SnapSkru self-drilling anchors for medium-duty applications in drywall where you need speed, ease-of-use, and secure holding strength that will NOT pull loose.

• Once it ‘POPs’ you know it's locked! Symmetrically locks to the wall/ceiling for a truly secure fastening – activates with an audible ‘pop’.
• Incredibly strong plastic wall anchors! Holds up to 80% more load than other reported self-drilling drywall anchors
• Built-in positive stop! Prevents overdriving the anchor when using a screwgun.
• Resist vibration and shock! Locking its thread into the wall, SnapSkru plastic anchors don’t pull loose when vibrated or shocked.
• Re-useable in the same hole! Remove the screw, without the anchor. Then re-install later, in the same anchor, with the same screw!
• Accepts a range of screw sizes! Use 3.5, 4.0, 4.5 and 5.0mm screws! (#6, #8, #10)