Toggler TC Hollow Wall Anchor 15 - 19mm (100)

100 x TC TOGGLER Hollow Wall Anchors

High quality hollow wall anchors designed to provide a secure, vibration-proof fixing in cavity walls up to 19mm thick, but still being able to support loads in unexpected solids up to 38mm, such as a wooden stud, as an expansion/wedge anchor! Capable of holding loads up to 72kg (UWL*) in 15mm Drywall!

Don't forget screws!

• Type: TC
• Pack Size: 100
• Ultimate Working Load (UWL) in 15mm Plasterboard: 72kg
• Safe Working Load (SWL) in 15mm Plasterboard*: 18kg
• Drill Hole Diameter: 8mm
• Grip (Wall Thickness) Range: 15 - 19mm
• Requires a Cavity of at least 19mm for fully toggled operation
• Use with screw diameter size: 4.0mm

TOGGLER hollow-wall anchors provide vibration-proof anchoring of light to medium loads in hollow walls & ceilings ... but also hold securely even when they encounter an unexpected solid, such as a wooden stud, or when performing as wedge anchors in materials with a thicknesses above their normal wall grip range.

New improvements in the original design have increased holding strength and resistance to abuse. Holding arms have been thickened and strengthened without increasing insertion hole size, and major stress points have been significantly reinforced without increasing anchor size.

• Strongest of ALL butterfly plasterboard fixings! Reinforces the wall/ceiling and leads the load away from the hole.
• Vibration and Shock proof! Won’t damage walls or ceilings
• Works in Solid walls! Acting as a secure wedge/expansion anchor when they encounter an unexpected solid.
• Accept a range of screw sizes! In each anchor and pre-installs through a small 8mm hole, without the screw.
• Won’t spin! Anti-Rotation fins prevent the anchor spinning even when using a screwgun.
• Corrosion proof! With stainless steel screws. Also non-magnetic and non-conductive butterfly plasterboard fixings.
• Remove the screw, without the anchor! Then re-install later, in the same anchor, with the same screw