Toggler TA Hollow Wall Anchor 3 - 6mm - (Pkt/100)

Stock Code: TOG11009

Available to Order - more stock is on the way

£16.93 (exc VAT) per Each
£20.32 (inc VAT)

Quantity Ordered	Price per Each
1 - 4	£16.93 (exc VAT)
5+	£15.21 (exc VAT)

Quantity: - +

100 x TA TOGGLER Hollow Wall Anchors

A superior hollow wall anchor designed to provide secure, vibration proof-holding in hollow substrates up to 6mm thick, but still being able to support loads in unexpected solids up to 25mm, such as a wooden stud, as an expansion/wedge anchor! Capable of holding loads up to 56kg (UWL*) in 6mm Plywood – perfect for hollow doors!

Don't forget screws!

Type: TA
Pack Size: 100
Ultimate Working Load (UWL) in 6mm Plywood: 56kg
Safe Working Load (SWL) in 6mm Plywood*: 14kg
Drill Hole Diameter: 8mm
Grip (Wall Thickness) Range: 3-6mm
Requires a Cavity of at least 13mm for fully toggled operation
Use with screw diameter size: 4.0mm

TOGGLER hollow-wall anchors provide vibration-proof anchoring of light to medium loads in hollow walls & ceilings ... but also hold securely even when they encounter an unexpected solid, such as a wooden stud, or when performing as wedge anchors in materials with a thicknesses above their normal wall grip range.

New improvements in the original design have increased holding strength and resistance to abuse. Holding arms have been thickened and strengthened without increasing insertion hole size, and major stress points have been significantly reinforced without increasing anchor size.

Strongest of ALL butterfly plasterboard fixings! Reinforces the wall/ceiling and leads the load away from the hole.
Vibration and Shock proof! Won’t damage walls or ceilings
Works in Solid walls! Acting as a secure wedge/expansion anchor when they encounter an unexpected solid.
Accept a range of screw sizes! In each anchor and pre-installs through a small 8mm hole, without the screw.
Won’t spin! Anti-Rotation fins prevent the anchor spinning even when using a screwgun.
Corrosion proof! With stainless steel screws. Also non-magnetic and non-conductive butterfly plasterboard fixings.
Remove the screw, without the anchor! Then re-install later, in the same anchor, with the same screw

Type	TA
Pack Quantity	100
Brand	TOGGLER

Click on any of the following links to download the file.

TOGGLER HWA Technical Info (pdf)

Descriptions

Type: TA
Pack Size: 100
Ultimate Working Load (UWL) in 6mm Plywood: 56kg
Safe Working Load (SWL) in 6mm Plywood*: 14kg
Drill Hole Diameter: 8mm
Grip (Wall Thickness) Range: 3-6mm
Requires a Cavity of at least 13mm for fully toggled operation
Use with screw diameter size: 4.0mm

Strongest of ALL butterfly plasterboard fixings! Reinforces the wall/ceiling and leads the load away from the hole.
Vibration and Shock proof! Won’t damage walls or ceilings
Works in Solid walls! Acting as a secure wedge/expansion anchor when they encounter an unexpected solid.
Accept a range of screw sizes! In each anchor and pre-installs through a small 8mm hole, without the screw.
Won’t spin! Anti-Rotation fins prevent the anchor spinning even when using a screwgun.
Corrosion proof! With stainless steel screws. Also non-magnetic and non-conductive butterfly plasterboard fixings.
Remove the screw, without the anchor! Then re-install later, in the same anchor, with the same screw