AF5 Alligator Flanged Universal Plug - Box/200

200 x AF5 (5mm) ALLIGATOR Universal Wall Anchors. (Flanged Head)

Don't forget screws!

The most versatile anchor on the market! Designed to work in solid walls but due to its unique features, will out-hold many other anchors in hollow substrates – capable of holding loads up to 1053kg (UWL*) in solid 4000psi concrete and up to 26kg in hollow 12.5mm Plasterboard! PLUS remove the screw without doing any damage or losing your anchor and even re-apply into the same fixing!

• Type: AF5
• Pack Size: 200
• Ultimate Working Load (UWL) in 4000psi concrete: 1053kg
• Safe Working Load (SWL) in 4000psi concrete*: 263.25kg
• Ultimate Working Load (UWL) in 12.5mm Plasterboard: 26kg
• Safe Working Load (SWL) in 12.5mm Plasterboard*: 6.5kg
• Drill Hole Diameter: 5mm
• Use with screw diameter sizes: 3.0 - 4.0mm

The TOGGLER ALLIGATOR® may look like a plastic plug, but it is no ordinary solid wall anchor. It provides the highest strength and vibration-proof holding values of any other anchor, out holding metal, adhesive, epoxy and even chemical anchors, when fixing into concrete and brick. It even works in hollow wall and unexpected cavities by popping open and locking its teeth into the screw thread to resist pull-out.

Other common solid wall anchors such as shield and expansion anchors require a precise hole to be drilled, a calibrated torque wrench and won’t work in an unforeseen cavity, whilst chemical and epoxy anchors are extremely expensive, very time consuming to install and require specific conditions to set correctly. The ALLIGATOR® solid wall anchor however, can be installed in seconds with any drill due to its anti-rotation fins to prevent spinning, sets instantly, is rust-proof and non-toxic and accepts a wide range of screws. With the unique ability to expand up to twice its own length and actually mould to masonry it creates an extremely effective bond between the screw and wall, distributing even holding pressure along the entire length of the fixing, whilst simultaneously sealing the hole from moisture!

• Extremely versatile! Holds securely in almost any substrate from solid walls to hollow walls.
• Exceptionally strong! Holds up to twice as much weight than metal, adhesive, epoxy and chemical anchors of equivalent size!
• Resist vibration and shock! Anchor bonds screw to concrete & masonry and simultaneously seals the hole.
• Corrosion Resistant! ALLIGATOR plugs are made from specially formulated polypropylene.
• Accepts a range of screw sizes! Each anchor is versatile enough to accept a wide range of screws sizes.